|
Post by el Gusano on Nov 29, 2010 13:16:09 GMT -5
I just tried to use my dual layer DVD burner for the first time. It worked fine.
Then I tried to burn another disk, and it gave me an error that said something about an address jump problem. I tried it 4 or 5 more times with different files.
Any ideas?
|
|
joedog
Senior Forumite
Posts: 2,830
|
Post by joedog on Nov 29, 2010 22:15:48 GMT -5
Gus, You might have broke it.
|
|
|
Post by el Gusano on Nov 30, 2010 9:51:25 GMT -5
It still works on single layer disks.
I just find it odd that it worked fine on the first disk and now won't work on the rest.
|
|
joedog
Senior Forumite
Posts: 2,830
|
Post by joedog on Nov 30, 2010 11:49:09 GMT -5
Have you tried checking for conflict with OS or software upgrades?
|
|
|
Post by el Gusano on Nov 30, 2010 12:16:49 GMT -5
Yes. Even tried restoring to a point before I burned the first one that worked.
|
|
joedog
Senior Forumite
Posts: 2,830
|
Post by joedog on Nov 30, 2010 14:06:59 GMT -5
You broke it.
LOL
|
|
duke
Senior Forumite
Mr. Tepid
Posts: 3,706
|
Post by duke on Nov 30, 2010 14:36:12 GMT -5
Buy a different brand of DVD media. You could have a bad batch or another brand may be more compatible.
|
|
|
Post by el Gusano on Nov 30, 2010 16:49:33 GMT -5
I think that's what I'm going to have to do.
When I did a google on it, there seem to be a lot of people with the same problem, and that's always the recommendation. But it still seems odd that the first one worked without a hitch.
|
|