|
Post by drewpster on Nov 4, 2008 3:47:36 GMT -5
Hi, I am a 20+ year experienced mechanic looking for side work here in Chattanooga and surrounding areas. I have experience in HD diesel truck work bumper to 5th wheel. I am also experienced in marine work from bass boat to family yacht. I can work on your site/ slip or can do limited work here at my home. I have a shop and a 3000lb capacity gantry. I can accommodate a single bobtail semi if the driveway is empty here at home. On diesel truck, I can do everything from PM work to major swaps and everything between. (engine swaps on your site). On boats I can accommodate trailered boats up to 24' here. Anything bigger and I will come to you. (even on the water) I am experienced with all pleasure boat marine systems including fiberglass and refinishing work. (limited bottom work) I have outboard, inboard, and I.O. experience. I can install that new fancy marine gadget or just unstop the head. Trucks are my career boats are my passion. Either way you get my full attention. I stake my reputation on every job. Just drop me a note at drewpster@comcast.net. You can post here or PM me as well.
|
|
|
Post by caterer on Nov 4, 2008 17:19:18 GMT -5
dana drive on a gibson houseboat? (33ft, fiberglass hull, 1977) engine sound, drive running without clutch currently..(and working pretty well actually)
hourly rate for fiberglass work? (upperdeck and engine compartment cover)
|
|
|
Post by erinslion on Nov 4, 2008 19:34:57 GMT -5
*sigh* No motorcycle experience huh?
|
|
|
Post by Tsavodiner on Nov 4, 2008 19:38:17 GMT -5
Riveting experience at the Harland and Wolff yards?
|
|
|
Post by drewpster on Nov 4, 2008 21:27:22 GMT -5
Caterer check your private messages.
Sorry my experience with bikes is limited. But I may be able to help you out. Give me an idea of what you need and if I am clueless, I may be able to hook you up with someone who can help you.
The only rivets I have driven come out of a gun. Those hammers get heavy. I have hammered a huck or two in my day though.
|
|
|
Post by cadillacdude1975 on Dec 21, 2008 17:10:22 GMT -5
you have the tools to install front drive shaft universal joints on a 1999 yamaha big bear 350 4x4?
|
|
Babs
Senior Forumite
Diet Spryte
Even cuter?
Posts: 3,674
|
Post by Babs on Dec 23, 2008 8:23:18 GMT -5
I think we've been over this before, but does anyone know a good body shop in the N. Chatt area?
|
|
hillcitytn
Full Member
in the end, life is just a moment in time
Posts: 335
|
Post by hillcitytn on Dec 23, 2008 9:13:09 GMT -5
Red Bank Body - north Red Bankistan near Church of God.
|
|
Babs
Senior Forumite
Diet Spryte
Even cuter?
Posts: 3,674
|
Post by Babs on Dec 25, 2008 0:35:20 GMT -5
That's about 3 miles from my house! I usually shop at that Bi Lo. I'll go by and see them. Basically, it's a left front fender that someone backed into and left. It makes it hard to open the door sometimes with the dent.
|
|
SunnyKC
Forumite
Wolf Wrangler
Posts: 1,439
|
Post by SunnyKC on Dec 29, 2008 18:27:55 GMT -5
Tell Jimmy KC reccomended him.. he plays on Mayo's pool team.. and has done a lot of work on my car!
|
|